Drilling fluid mixing systems
Having the right drilling fluid is a great starting point. You need the right mixing systems to effectively and efficiently mix and yield your drilling fluid. A good mixing system will ensure you are able to get the best out of your drilling fluid.
The rig manufacturers have always been under competitive pressure to keep the costs of their rig down. This has often led to them providing a pump, venturi and mixing system that are not capable of delivering the full capability of their rig.
Tim bought a tank. It takes him no time at all to mix 3500L of mud.
Clay didn’t buy a tank. He's still mixing mud.
Be like Tim.
Performix® Mixer
The Performix® Mixer gets your mud sheared and yielded faster.
The Performix® Mixer 640L (PM170)
The Straightline Performix® Mixer generates 640 litres per minute through the venturi to get your mud sheared and yielded faster.
L: 610mm, W: 991mm, H: 1067mm
Kohler Command CS Pro 7 HP (4.5 KW) gas engine w/heavy duty cyclonic air cleaner and pull-start
643 LPM pump designed to turn tank over in less than 2 minutes
23 L fuel tank for extended run time between refueling
Large capacity hopper with pivoting lid that doubles as a bag rest
Field-proven high-speed jet and venturi produce sheared and yielded mud in a matter of minutes
Connections: 51 mm suction and discharge ports w/ball valves
Mounts easily to any truck or trailer
The Performix® Mixer 1380L (PM365)
The Straightline Performix® Mixer generates 1,380 litres per minute through the venturi to get your mud sheared and yielded faster.
L: 890mm, W: 690mm, H: 1020mm
Kohler Command CS Pro 14 HP (10.5 KW) gas engine w/heavy duty cyclonic air cleaner and electric start
1380 LPM pump designed to turn tank over in less than 3 minutes
23 L fuel tank for extended run time between refueling
Large capacity hopper with pivoting lid that doubles as a bag rest
High-speed jet effectively shears the bentonite plates, producing the highest possible yield
Mechanical seal runs in antifreeze, so the seal is constantly lubricated (the pump can be run dry without damaging the seal)
Connections: 76mm suction camlock on suction side, 76mm hose barb on the discharge side, and a 51mm male camlock for supply hose
Mounts easily to any truck or trailer
Yield Tank
The Straightline Yield Tanks feature four highly efficient tank jets to yield your drilling fluid quickly and effectively
Yield Tank 1892L (SL500)
L: 2896mm, W: 610mm, H: 1753mm
Urethane paint on steel components.
50.4mm full port bungs
Shut-off valves on the suction and discharge ports
1,892 L tanks have a mixing circuit with four tank jets to deliver a fast and thorough yield
Featuring a radius bottom, front to back slope, and a center sump area eliminating fluid settlement issues
Mounted to a precision engineered heavy-duty skid, the entire package is only 610mm wide, creating an extremely compact footprint needed for easy installation on your HDD trailer
Yield Tank 3785L (SL1000)
L: 2637mm, W: 1112mm, H: 1681mm
Urethane paint on steel components.
76mm full port bungs
Shut-off valves on the suction and discharge ports
3,785 L tanks have a mixing circuit with four tank jets to deliver a fast and thorough yield
76mm high volume drain to empty valve means no left over mud in the tank
Supplier case study
Drillco wanted to exceed their customers expectations on a project timeline. They chose a twin 1000 gallon tank set up, in tandem with a Straightline mixing system. This enabled them to continuously pump 150LPM to the drill, while building the next batch of fluid.
Always looking for a professional edge; Drillco can now work continuously. They never stop to build more mud, creating a faster workflow, with more pipe in the ground.
Drillco
Directional drilling specialists
You might also be interested in:
Drilling fluid & drill mud
Drilling fluid solids control equipment
HDD Kopr thread grease
Drill rods & casings
Send us a message and our team will be in touch